|
- 品牌：德國KAYSEN
- 貨號：KS561059
- 發布日期： 2019-10-12
- 更新日期： 2025-08-21
| 外型尺寸 | |
| 貨號 | KS561059 |
| 品牌 | KAYSEN |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
抽沙泵-高鉻合金抽沙泵-KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
抽沙泵適合抽取各種黃沙、礦砂、工礦企業輸送尾礦漿、尾沙礦、料漿、礦渣、電力粉煤灰輸送等具有強磨蝕的介質。
主要特點：
高效、節能、耐磨、耐腐蝕、運行可靠、揚程高、流量大(*混合流量可達2000-5000立方/小時)、抽深大(最深可抽水下30米深)、輸送距離遠適用范圍廣等特點。輸送的固液混合濃度可達到60%?？膳鋷щ姍C(jī)或者是柴油機驅動。
主要應用：
●江、河、湖、海抽沙
●水庫抽沙
●圍海造田
●抽鐵礦砂
●淘金沙
●抽送泥漿
使用注意事項：
●抽沙泵在工作現場固定后，應先檢查原動機主軸與泵主軸是否在同一軸線上，若不同軸應即作精準調整。
●泵的進出水管路應有承載支撐，避免管路重力施加于泵體。管路安裝應從泵進出口法蘭向外延伸，并立即做好支撐定位。
●抽沙泵工作時必須對填料室注入高壓清水以保護軸封組件。主泵在正常工作時不得關閉高壓清水泵。清水壓力應大于抽沙泵工作壓力。填料室組件在沒有高壓清水保護的情況下會很快磨損。
●泵性能表中的吸程是指常溫清水條件下泵的抗汽蝕特性。在抽送泥沙作業時應盡可能使泵的壓力為正壓。泥沙中含有較大固體顆粒時泵的流量揚程也會受到影響，選型時應對介質情況予以考量。
●更換葉輪、襯板等易損件時應對葉輪與前后襯板的間隙進行調整，葉輪與襯板軸向間隙的大小對泵的性能和使用壽命有較大影響。
●請及時適量對軸承部位加注潤滑油脂。
●泵在工作中出現異常震動、噪聲及軸承溫升過高時，應即停機檢查。
Submersible sand pump
Mud pump
Sand pump
The sand pump is suitable for pumping a variety of yellow sand, mineral sand, industrial and mining enterprises to transport tailings slurry, tailings, slurry, slag, power fly ash transport and other strong abrasive media.
main feature:
High efficiency, energy saving, wear resistance, corrosion resistance, reliable operation, high lift, large flow (maximum mixing flow rate up to 2000-5000 cubic meters / hour), deep pumping depth (the deepest can be pumped underwater 30 meters deep), conveying distance far-reaching range Wide and other characteristics. The solid-liquid mixing concentration delivered can reach 60%. It can be equipped with a motor or a diesel engine.
main application:
● River, river, lake, sea and sand
● Reservoir pumping
●Walking the sea
●Extracted iron ore
●Amoy Sands
● pumping mud
Precautions for use:
● After the sand pump is fixed at the work site, check whether the prime mover spindle and the pump spindle are on the same axis. If different shafts should be precisely adjusted.
● The inlet and outlet pipes of the pump should have load-bearing support to prevent the gravity of the pipe from being applied to the pump body. Pipe installation should extend outward from the pump inlet and outlet flanges and immediately support and position.
● When the sand pump is working, high pressure water must be injected into the packing chamber to protect the shaft seal assembly. The main pump must not be closed to the high pressure clean water pump during normal operation. The clean water pressure should be greater than the working pressure of the sand pump. The packing chamber assembly wears out quickly without high pressure water protection.
● The suction stroke in the pump performance table refers to the anti-cavitation characteristics of the pump under normal temperature and clear water conditions. When pumping sediment, the inlet pressure of the pump should be as positive as possible. When the sediment contains large solid particles, the flow head of the pump will also be affected. The media should be considered when selecting the type.
● When replacing the wearing parts such as the impeller and the lining plate, the clearance between the impeller and the front and rear lining plates should be adjusted. The axial clearance between the impeller and the lining plate has a great influence on the performance and service life of the pump.
● Please fill the bearing parts with grease in time.
●When the pump has abnormal vibration, noise and excessive bearing temperature rise, it should be stopped for inspection.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
