|
- 品牌：德國KAYSEN
- 貨號：KS561059
- 發布日期： 2019-10-12
- 更新日期： 2025-08-21
| 外型尺寸 | |
| 貨號 | KS561059 |
| 品牌 | KAYSEN |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
泥漿泵-高鉻合金泥漿泵-KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
泥漿泵也是一種寬泛的泵的一個通俗概念，不同的地域，習慣，最終涉及的泵型不會一樣，本詞條所闡述的泥漿泵是多數意義上的的一種泵型：石油鉆井領域的所應用的泥漿泵。事實上，污水泵，渣漿泵等一些非清水泵和泥漿泵在叫法上也有通用的時候。本詞條給讀者闡述的是鉆井領域的泥漿泵。
主要特點：
●可輸送高濃度高粘度<10000PaS及含有顆粒的懸浮漿液。
●輸送液流穩定、無過流、脈動及攪拌、剪切漿液現象。
●排出壓力與轉速無關 ，低流量也可保持高的排出壓力。
●流量與轉速成正比，通過變速機構或調速電機可實現流量調節。
●自吸能力強，不用裝底閥可直接抽吸液體。
●泵可逆轉，液體流向由泵的旋轉方向來改變，適用于管道需反正向沖洗的場合。
●運轉平穩、振動、噪聲小。
●結構簡單、拆裝維修方便。
主要應用：
使用于礦山、造紙、印染、環保、石墨、云母、黃金、陶瓷、煉油、石油、化工、農場、鹽場、碘場、染化、釀酒、食品、化肥、焦化選廠、建筑、大理石廠、金礦、泥漿、流沙、泥塘、污塘、污濁液送吸濃漿稠液、裝料及懸浮物質的污水作業，也可作煤礦排水及含有泥塊的流體。
注意事項：
泥漿泵開機前，請檢查進水管、出水管是否有堵塞，向前后軸承是否加注黃油，檢查盤根是否充滿。泥漿泵工作時應配備高壓清水泵，將大于泥漿泵壓力的清水輸向防漏填料，對填料進行防護，泥漿泵工作時不得關閉沖洗泵，否則，將使密封部分迅速磨損。葉輪與護板之間的間隙是否合理，對泥漿泵壽命影響很大。間隙不合理，則泵運轉時產生振動與噪音，過流部件很快損壞，因此更換葉輪時，應注意使間隙滿足圖紙要求，間隙調整，可通過后軸承體上的調整螺釘來進行。泥漿泵的允許吸程是在輸送清水時測定的，在抽吸泥漿時應考慮泥漿對吸上能力的影響。
Submersible sand pump
Mud pump
Sand pump
Mud pump is also a common concept of a wide range of pumps. Different regions, habits, and ultimately the pump type will not be the same. The mud pump described in this entry is a pump type in most sense: oil drilling The applied mud pump. In fact, some non-clean water pumps and mud pumps, such as sewage pumps and slurry pumps, are also commonly used when they are called. This entry is for the reader to explain the mud pump in the drilling field.
main feature:
● It can transport high concentration and high viscosity <10000PaS and suspended slurry containing particles.
●The conveying liquid flow is stable, no over-current, pulsation and stirring, shearing slurry phenomenon.
● The discharge pressure is independent of the speed, and the low flow rate can also maintain a high discharge pressure.
● The flow rate is proportional to the speed. The flow rate can be adjusted by the shifting mechanism or the speed regulating motor.
●The self-priming ability is strong, and the liquid can be directly sucked without the bottom valve.
● The pump can be reversed, and the liquid flow direction is changed by the rotation direction of the pump. It is suitable for the occasion where the pipeline needs to be reversely flushed.
● Smooth operation, vibration and low noise.
●Simple structure, convenient disassembly and assembly.
main application:
Used in mining, paper making, printing and dyeing, environmental protection, graphite, mica, gold, ceramics, oil refining, petroleum, chemical, farm, salt field, iodine field, dyeing, brewing, food, fertilizer, coking plant, construction, marble factory, gold Mines, mud, quicksand, mud ponds, sewage ponds, sewage liquids can be used to pump sewage thick liquid, charging materials and suspended materials. It can also be used for coal mine drainage and fluids containing mud.
Precautions:
Before starting the mud pump, please check if the inlet pipe and outlet pipe are blocked. If the bearing is filled with butter before and after, check if the packing is full. The mud pump should be equipped with a high-pressure clean water pump to transport the clean water larger than the mud pump pressure to the leak-proof packing to protect the packing. The mud pump should not be closed when the mud pump is working. Otherwise, the sealing part will wear quickly. Whether the gap between the impeller and the guard plate is reasonable has a great influence on the life of the mud pump. If the gap is unreasonable, vibration and noise will occur when the pump is running, and the overcurrent components will be damaged quickly. Therefore, when replacing the impeller, care should be taken to ensure that the clearance meets the requirements of the drawings. The clearance adjustment can be performed by adjusting the screws on the rear bearing body. The allowable suction stroke of the mud pump is measured when the clean water is delivered. The effect of the mud on the suction capacity should be considered when pumping the mud.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
