|
- 品牌：德國KAYSEN
- 貨號：KS561059
- 發布日期： 2019-10-12
- 更新日期： 2025-08-21
| 外型尺寸 | |
| 貨號 | KS561059 |
| 品牌 | KAYSEN |
| 用途 | 抽水、化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 電動 |
| 適用介質 | 水 |
加藥攪拌機-攪拌機-KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
加藥攪拌機裝置，在水處理工程中加藥箱主要用于各種藥劑的攪拌、溶解、儲存，再通過計量泵或水射器將藥液投加到各投加點。加藥箱外形分為方形和圓形，材質為聚乙烯（PE），通過滾塑技術一次成型，上部預設了計量泵及攪拌機的安裝位置，攪拌機、加藥箱、計量泵三合一，使用非常方便。
主要特點：
●高速比和高效率
單級傳動，就能達到 1：87的減速比，效率90%以上，如果采用多級傳動，減速比更大。
●結構緊湊體積小
由于采用了行星傳動原理，輸入軸與輸出軸在同一心線上，使其機型獲得盡可能小的尺寸。
●運動平穩噪聲低
擺線針齒 嚙合齒數較多，重疊系數大以及具有機件
平衡的機理，使振動和噪聲限制在最小程度。
●使用可靠、壽命長
因主要零件采用高碳鉻鋼材料，經淬火處理，獲得高強度，并且部分傳動接觸采用了滾動摩擦，所以經久耐用壽命長。
●設計合理、維修方便
容易分解安裝，最少零件個數以及簡單的潤滑，使擺線輪減速機深受用戶的信賴。
主要應用：
主要應用在水處理中藥劑制備，中和反應池懸濁液混合，石灰漿、活性炭、其他聚合物的混合攪拌。
加藥攪拌機攪拌注意事項：
●攪拌器需有正確的安裝和使用才能保證安全長周期的穩定運行。
●安裝人員應有相應的資質和熟悉機械設備安裝知識的人員來進行安裝工作。
●攪拌器需垂直安裝，垂直度偏差應不大于5度。
●攪拌系統嚴禁攪拌固體和粘度大的液體。
●電機和軸承溫度不能在超過75℃情況下運行。
●電機和軸承及變速箱不能在缺潤滑油情況下運行。
●攪拌器軸和葉片不能在彎曲或變形情況下運行。如發現軸有彎曲現象或葉片有變形現象則應立即停機進行處理或更換。
Hyperbolic mixer
Frame mixer
Paddle mixer
Imported dosing mixer device, in the water treatment project, the dosing box is mainly used for stirring, dissolving and storing various chemicals, and then the drug solution is added to each feeding point through a metering pump or a water ejector. The shape of the dosing box is divided into square and round. The material is made of polyethylene (PE). It is formed by rotomolding technology. The upper part presets the installation position of the metering pump and the mixer. The mixer, the dosing box and the metering pump are three-in-one. Very convenient to use.
main feature:
●High speed ratio and high efficiency
Single-stage transmission can achieve a reduction ratio of 1:87 with an efficiency of more than 90%. If multi-stage transmission is used, the reduction ratio is larger.
● Compact structure and small size
Thanks to the planetary transmission principle, the input shaft and the output shaft are on the same core, making the model as small as possible.
●Slow motion and low noise
Cycloidal pin teeth have a large number of meshing teeth, large overlap factor and mechanical parts
The mechanism of balance keeps vibration and noise to a minimum.
●Reliable use and long life
Because the main parts are made of high-carbon chrome steel, they are quenched to obtain high strength, and some of the transmission contacts use rolling friction, so the durability is long.
● Reasonable design and convenient maintenance
Easy to disassemble and install, the minimum number of parts and simple lubrication make the cycloid reducer deeply trusted by users.
main application:
Mainly used in the preparation of water treatment, neutralization of the reaction tank suspension mixing, mixing of lime slurry, activated carbon, other polymers.
Imported dosing mixer mixing notes:
● The agitator needs to be properly installed and used to ensure stable operation for a long period of safety.
● The installer should have the appropriate qualifications and personnel familiar with the installation of mechanical equipment to carry out the installation work.
● The stirrer should be installed vertically, and the deviation of verticality should be no more than 5 degrees.
● Stirring system is strictly prohibited to stir solid and viscous liquid.
● Motor and bearing temperatures cannot be operated above 75 °C.
● Motors and bearings and gearboxes cannot be operated without lubricant.
? The agitator shaft and blades cannot be operated under bending or deformation. If the shaft is found to be bent or the blade is deformed, stop it immediately for disposal or replacement.
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
