|
- 品牌：KAYSEN
- 貨號：KS5987563
- 發布日期： 2019-10-11
- 更新日期： 2025-08-21
| 外型尺寸 | |
| 品牌 | KAYSEN |
| 貨號 | KS5987563 |
| 用途 | 化工、制藥、石油、冶金、染料、冶煉、電力、電鍍、農藥、造紙、食品、紡織等行業酸洗工藝、制酸制堿、噴漆工藝、有色金屬冶煉中的電解液輸送、離子膜項目中的氯水輸送、廢水處理、電鍍、農藥領域。 |
| 型號 | KAYSEN |
| 工作壓差 | 0 |
| 制造商 | |
| 壓力環境 | 常壓 |
| 介質溫度 | 250℃ |
| 驅動方式 | 氣動 |
| 適用介質 | 水 |
| 是否進口 |
進口氟塑料氣動隔膜泵-進口氣動隔膜泵-德國KAYSEN泵業
GERMANY KAYSEN PUMP CO .,LTD
進口氟塑料氣動隔膜泵是一種新型輸送機械，是目前業內比較新穎的一種泵類。采用壓縮空氣為動力源，對于各種腐蝕性液體，帶顆粒的液體，高粘度、易揮發、易燃、劇毒的液體，均能予以抽光吸盡。目前已形成系列化生產，共有八種規格直徑：φ10mm（3/8''）、φ15mm（1/2''）、φ25mm（1''）、φ40mm（11/2''）、φ50mm（2''）、φ65mm（21/2''）、φ80mm（3''）、φ100mm（4''）。四種材質：鋁合金、鑄鐵、不銹鋼、工程塑料。隔膜泵根據不同液體介質分別采用丁晴橡膠、氯丁橡膠、氟橡膠、聚四氟乙烯隔膜。以滿足不同用戶的需要。
主要特點：
●該泵無旋轉部件，不會造成環境污染和危害人身安全。
●不必用電，在易燃、易爆場所使用安全可靠。
●可輸送較粘的液體。（粘度在1萬厘泊以下）
●本泵無須用油潤滑，即使空轉，對泵也無任何影響，這是該泵一大特點。
●氣動隔膜泵既能抽送流動的液體，又能輸送一些不易流動的介質，具有自吸泵、潛水泵、屏蔽泵、泥漿泵和雜質泵等輸送機械的許多優點。
●不需要灌引水，吸程高達7m，揚程達50m，出口壓力不小于6kgf每平方厘米。
●流動寬蔽，通過性能好，允許通過*顆粒。直徑達10mm抽送泥漿、雜質時，對泵磨損極小。
●揚程、流量可通過氣閥開度實現無級調節。（氣壓調節在2-8kg/平方厘米）
主要優點：
●噪音底
●震動小
●使用壽命長
● 死機
●做工精細
主要應用：
●礦井、坑道、隧道、選礦、礦渣中的積水。泵吸水泥灌漿及灰漿。
●隔膜泵泵吸各種橡膠漿。
●氣動隔膜泵作為各種固液體分離設備的前級送壓裝置。
●塑料氣動隔膜泵可以吸花生醬、泡菜、土豆泥、小紅腸、果醬蘋果漿、巧克力等。
●塑料氣動隔膜泵可以用于吸油漆、樹膠、顏料。
●吸各種污水。
●氣動隔膜泵可以用于為油輪，駁船吸取倉內污水。
●吸啤酒花及發酵粉稀漿、糖漿、糖密。
●粘合劑和膠水、全部種類可用泵吸取。
●氣動隔膜泵可以吸各種磨料、腐蝕劑、石油及泥漿、清洗油垢及一般容器。
●可以吸各種劇毒、易燃、易揮發液體。
●各種強酸、強堿、強腐蝕液體。
●吸各種高溫液體*可耐150度。
●各種瓦、瓷、磚器及陶器釉漿。
●油井鉆好后，用氣動隔膜泵吸沉積物及灌漿。
●吸各種乳劑和填料。
The pneumatic diaphragm pump is a new type of conveying machine, which is a relatively new type of pump in the industry. Compressed air is used as the power source. For various corrosive liquids, liquids with particles, high viscosity, volatile, flammable and highly toxic liquids can be exhausted. At present, serial production has been formed, with a total of eight specifications diameter: φ10mm (3/8''), φ15mm (1/2''), φ25mm (1''), φ40mm (11/2''), φ50mm (2 ''), φ65mm (21/2''), φ80mm (3''), φ100mm (4''). Four materials: aluminum alloy, cast iron, stainless steel, engineering plastics. The diaphragm pump uses nitrile rubber, neoprene rubber, fluororubber, and polytetrafluoroethylene diaphragm according to different liquid media. To meet the needs of different users.
main feature:
●The pump has no rotating parts and will not cause environmental pollution and personal safety.
●It is not necessary to use electricity, and it is safe and reliable to use in flammable and explosive places.
● It can transport a relatively viscous liquid. (viscosity below 10,000 centipoise)
●The pump does not need to be lubricated with oil. Even if it is idling, it has no effect on the pump. This is a major feature of the pump.
●The pneumatic diaphragm pump can pump both flowing liquid and some non-flowing medium. It has many advantages of self-priming pump, submersible pump, shield pump, mud pump and impurity pump.
● No need to irrigate water, the suction stroke is up to 7m, the lift is up to 50m, and the outlet pressure is not less than 6kgf per square centimeter.
● Flowable cover, good performance, allowing the passage of the largest particles. When pumping mud and impurities up to 10mm in diameter, the pump wear is minimal.
●The head and flow can be adjusted steplessly through the valve opening. (Pneumatic pressure is adjusted at 2-8kg/cm 2 )
The main advantage:
● noise floor
●Small vibration
●Long service life
● Never crash
●Working fine
main application:
● Water in mines, tunnels, tunnels, beneficiation, and slag. Pumping cement grout and mortar.
●The diaphragm pump pumps all kinds of rubber slurry.
●Pneumatic diaphragm pump is used as the front stage pressure supply device for various solid liquid separation equipment.
●Plastic pneumatic diaphragm pump can absorb peanut butter, kimchi, mashed potatoes, small red sausage, jam apple pulp, chocolate and so on.
●Plastic pneumatic diaphragm pump can be used to absorb paint, gum and pigment.
● Suction all kinds of sewage.
●Pneumatic diaphragm pump can be used to pick up the sewage in the tank for the tanker and barge clearance.
●Suck hops and fermented powder slurry, syrup and sugar.
●Adhesives and glues, all types can be pumped.
●Pneumatic diaphragm pump can absorb all kinds of abrasives, corrosives, oil and mud, cleaning grease and general containers.
● Can absorb a variety of highly toxic, flammable, volatile liquids.
● A variety of strong acids, strong alkalis, strong corrosive liquids.
●It can withstand up to 150 degrees of high temperature liquid.
●All kinds of tiles, porcelain, bricks and pottery glaze.
● After drilling the oil well, pump the sediment and grout with a pneumatic diaphragm.
● Aspirate various emulsions and fillers.
Cast steel pneumatic diaphragm pump
Stainless steel pneumatic diaphragm pump
Fluoroplastic pneumatic diaphragm pump
Pneumatic powder pump
Sanitary diaphragm pump
位于Schw?bischGmünd的凱森Kaysen泵業有限公司是 *的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們全面的產品組合，我們支持 各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。
凱森始終堅持“重質量，講信譽”為宗旨。產品現 全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。
The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.
